2026-11
Call (855) 450-1212Request diagnostics["coolant hose leak","coolant fluid loss"]
When a semi-truck develops a coolant hose leak on the road, the issue usually stems from rubber degradation due to age, heat cycling, loose or damaged hose clamps, or rubbing against adjacent engine brackets. If you notice fluid pooling under the engine bay or low coolant warnings, safety should be your immediate priority. Park the truck in a safe location and turn off the engine to allow the system to cool down completely before attempting any checks. Never remove a hot radiator cap, as pressurized coolant can cause severe burns. Inspect the upper and lower radiator hoses, heater hoses, and coolant lines for visible splits, bulges, or loose fittings. If you find a simple loose clamp and have spare coolant, tightening it and topping off with the correct coolant color—whether green standard ethylene glycol or red extended-life coolant—might get you to the nearest shop. However, if a hose has ruptured or cracked, do not run the engine. Running a diesel engine without proper coolant flow will rapidly lead to severe overheating, blown head gaskets, or cracked engine blocks. In these situations, a mobile technician can come directly to your location, replace the damaged hose, refill the proper coolant, and bleed the air from the system safely on site.
Driver provided a photo showing a damaged coolant hose causing fluid loss; technician dispatched with replacement hose and coolant to fix on site.
fixed on site
Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.
When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…
When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…
When a Kenworth trailer knob charges properly but the yellow parking brake knob has no air supply, the issue typically points to a failed dash push-pull control valve block, an internal manifold seal failure, or a disconnected supply line behind the dashboard…
When both primary and secondary air supply lines deliver full pressure up to the dash control valve but the system fails to hold pressure or operate properly, the internal seals within the dash control valve assembly have likely degraded. The dash brake valve…
When pigtails or air hoses drop and catch on a spinning drive tire or driveshaft, the extreme force will yank the hoses and snap whatever mounting hardware or valve assembly secures them to the back of the tractor cab. Replacing just the red and blue coiled s…
123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (855) 450-1212 · Request a quote · Local numbers · Real calls · mtstruckservice.com
Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.