2026-11
Call (855) 450-1212Request diagnostics["air lines wrapped around tire","tractor air line manifold valve snapped off frame","broken trailer supply air valve"]
When pigtails or air hoses drop and catch on a spinning drive tire or driveshaft, the extreme force will yank the hoses and snap whatever mounting hardware or valve assembly secures them to the back of the tractor cab. Replacing just the red and blue coiled service lines will not fix the issue if the tractor protection valve or air line manifold bracket itself was shattered or pulled straight out of the frame bulkhead. If your lines get pulled, safely park the vehicle with chocks and drain the air tanks before inspecting the damage behind the cab. Inspect the entire mounting area to see if the cast valve body cracked or if air fittings sheared off inside the threads. Check whether the 7-way electrical cable or green ABS cord sustained hidden wire damage. Because a shattered tractor valve prevents the air system from building or holding pressure to release the parking brakes, you cannot drive the truck. A mobile diesel technician must source the exact replacement valve by OEM part number, replace the manifold assembly, reattach line fittings using proper sealant, and perform a full air leak test before you return to the road.
Trailer air hoses wrapped around a tire while driving, tearing the lines out and snapping the main tractor protection air manifold valve off the back of the cab frame. The driver replaced the red and blue service lines, but the mounting valve housing itself cracked and snapped.
parts needed
Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.
When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…
When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…
When a Kenworth trailer knob charges properly but the yellow parking brake knob has no air supply, the issue typically points to a failed dash push-pull control valve block, an internal manifold seal failure, or a disconnected supply line behind the dashboard…
When both primary and secondary air supply lines deliver full pressure up to the dash control valve but the system fails to hold pressure or operate properly, the internal seals within the dash control valve assembly have likely degraded. The dash brake valve…
123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (855) 450-1212 · Request a quote · Local numbers · Real calls · mtstruckservice.com
Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.