123 TRUCK DIAGNOSTICS(855) 450-1212 · Mobile diagnostics 24/7

My 2015 Volvo truck cannot build air pressure and I suspect an air hose leak, what should I check?

2015 Volvo · 2026-11

Call (855) 450-1212Request diagnostics

What was reported

["unable to build any air","suspected air hose leak"]

Our answer

When a 2015 Volvo truck cannot build air pressure, the most common culprit is a severe air leak in a supply line or hose, a stuck-open air dryer purge valve, or a malfunctioning air governor. A damaged main supply line or broken hose coming off the compressor or tractor-trailer connections will let air escape faster than the compressor can pump it. To troubleshoot safely, chock your wheels, release the parking brakes if safe, and perform a walkaround while listening for audible air hiss. Check your glad hand seals, pigtails, and tractor-to-trailer air lines for noticeable cracks, splits, or loose fittings. Next, inspect under the cab and near the air dryer assembly to see if air is constantly purging or blowing out of the bottom discharge valve. If you locate a minor leak on a trailer line or glad hand seal, replacing the seal or replacing a quick-connect fitting might temporarily get you rolling. However, if the air compressor itself isn't pumping, the governor has failed, or a primary high-pressure hose between the compressor and air dryer has ruptured, you will need a mobile diesel mechanic equipped with heavy-duty air brake diagnostics and replacement lines to repair it safely on site.

What the technician found

Cause not confirmed on the call

How it ended

unknown

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why won't my Kenworth parking brake valve push in to release the brakes when I have full air pressure?

Kenworth · Richmond, · 2026-11

When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…

Why are my semi truck parking and trailer brake valves refusing to release when I have plenty of air pressure?

2026-11

When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…

Why does my Kenworth yellow parking brake knob have no air supply while the red trailer knob works?

Kenworth · 2026-11

When a Kenworth trailer knob charges properly but the yellow parking brake knob has no air supply, the issue typically points to a failed dash push-pull control valve block, an internal manifold seal failure, or a disconnected supply line behind the dashboard…

Why is my semi truck air leaking or failing at the dash valve when both supply lines have pressure?

2026-11

When both primary and secondary air supply lines deliver full pressure up to the dash control valve but the system fails to hold pressure or operate properly, the internal seals within the dash control valve assembly have likely degraded. The dash brake valve…

What should I do if my air lines wrapped around my tire and snapped the air valve off the back of the cab?

2026-11

When pigtails or air hoses drop and catch on a spinning drive tire or driveshaft, the extreme force will yank the hoses and snap whatever mounting hardware or valve assembly secures them to the back of the tractor cab. Replacing just the red and blue coiled s…

All real calls

123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (855) 450-1212 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.

Call (855) 450-1212Request