123 TRUCK DIAGNOSTICS(855) 450-1212 · Mobile diagnostics 24/7

Why did my Western Star derate and shut down after a radiator hose came loose?

Western Star Detroit engine · Dawson Creek, BC · Kiskatinaw Hill · 2026-11

Call (855) 450-1212Request diagnostics

What was reported

["rad hose leak","engine derated","limp mode","engine shut down"]

Our answer

When a radiator hose comes loose or leaks coolant on a Detroit engine, the ECM detects rapid coolant loss and high engine temperatures. To protect the engine from severe internal damage like blown head gaskets or warped heads, the ECM triggers a derate into limp mode before automatically shutting the truck down.

If this happens on the road, safely pull over and let the engine cool completely before opening the hood. Inspect the upper and lower radiator hoses, clamps, and fittings for pops, tears, or loose hose clamps. If a clamp simply slipped off, reattaching the hose and tightening the clamp may fix the leak, but you must refill the cooling system with the proper coolant blend before attempting a restart. Never run the engine dry.

Even after repairing the hose and topping off coolant, modern Detroit engines often latch active low coolant and engine temperature fault codes. While some shutdown codes clear after heat levels normalize and coolant level sensors register full, severe derates require a technician with diagnostic software to clear the latched codes and reset the engine status. If the engine overheated severely or refuses to start after refilling coolant, call a mobile diesel mechanic or request a tow to avoid catastrophic engine damage.

What the technician found

Driver reported a rubber radiator hose clamp came undone on a Detroit engine, leaking coolant and causing the truck to derate into limp mode and shut off.

How it ended

unknown

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why is my truck's auxiliary air reading 90 PSI while the secondary air pressure drops to 7 PSI and won't build up?

Fort St. John, BC · 2026-11

When a semi-truck shows normal auxiliary air pressure around 90 PSI while secondary air drops down to 7 PSI and fails to build, the air distribution system is isolating or losing air in the secondary circuit. The primary suspect is a faulty pressure protectio…

Why won't my Kenworth parking brake valve push in to release the brakes when I have full air pressure?

Kenworth · Richmond, · 2026-11

When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…

Why won't my 2019 Kenworth release the parking brakes even though the truck is building full air pressure?

2019 Kenworth · Richmond, CA · 2026-11

When a Kenworth builds full air pressure but the parking brakes refuse to release, the issue usually stems from a restriction in the spring brake release circuit, a faulty dash brake control valve, or a stuck relay valve. If a valve was recently serviced or r…

Why are my semi truck parking and trailer brake valves refusing to release when I have plenty of air pressure?

2026-11

When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…

All real calls

123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (855) 450-1212 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.

Call (855) 450-1212Request