123 TRUCK DIAGNOSTICS(515) 200-7810 · Mobile diagnostics 24/7

Why is my Kenworth with a Cummins engine not building any air pressure?

Kenworth Cummins engine · 2026-11

Call (515) 200-7810Request diagnostics

What was reported

["truck not building air","no air in secondary tank","no air leak heard"]

Our answer

When a Kenworth truck equipped with a Cummins engine fails to build any air pressure in both primary and secondary tanks without an obvious audible air leak, the issue usually stems from the air supply system before the reservoir distribution. The most common culprit is a damaged or severed braided stainless discharge line running between the air compressor and the air dryer. If this line splits, compressed air escapes rapidly under the cab without a distinct hiss inside the cab. Another frequent cause is a failed air governor or stuck unloader valve on the compressor, which prevents the compressor from engaging and pumping air into the system. Additionally, even if an air dryer or compressor was recently replaced, an internal failure, blown head gasket on the compressor, or stripped compressor drive gear can cause total loss of air production. Drivers should visually check the discharge line from the compressor to the air dryer for ruptures, verify that the governor lines are secure, and inspect the air dryer purge valve for continuous venting. If no visible damage or stuck purge valve is found, a mobile diesel mechanic should test compressor output pressure directly and verify governor actuation to prevent unsafe operation.

What the technician found

Cause not confirmed on the call

How it ended

customer declined

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why is my semi truck constantly losing air out of the air dryer purge valve while parked?

Clive, IA · 2026-11

When a semi truck constantly vents air out of the air dryer purge valve, the most common issue is a stuck open purge valve or a degraded internal seal inside the air dryer assembly. Oil, moisture, and sludge buildup from the air compressor can contaminate int…

Why won't my Kenworth parking brake valve push in to release the brakes when I have full air pressure?

Kenworth · Richmond, · 2026-11

When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…

Why won't my 2019 Kenworth release the parking brakes even though the truck is building full air pressure?

2019 Kenworth · Richmond, CA · 2026-11

When a Kenworth builds full air pressure but the parking brakes refuse to release, the issue usually stems from a restriction in the spring brake release circuit, a faulty dash brake control valve, or a stuck relay valve. If a valve was recently serviced or r…

Why are my semi truck parking and trailer brake valves refusing to release when I have plenty of air pressure?

2026-11

When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…

All real calls

123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (515) 200-7810 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.

Call (515) 200-7810Request