Volvo · Portland, KY · I-75 · 2026-11
Call (502) 219-3300Request diagnostics["trailer brakes locking up","tire streaks behind trailer","truck won't move in drive","yellow check engine light"]
When trailer brakes lock up and prevent a semi-truck from moving forward, the issue usually stems from an air delivery problem or mechanical binding in the trailer spring brake system. Common causes include a compromised red emergency glad hand connection, air leakage in the trailer supply lines, frozen moisture in the relay valve, a failed trailer spring brake chamber, or stuck S-cams and brake shoes.
Before calling dispatch, safely inspect your glad hand seals and ensure the red trailer air supply button on your dash is fully pushed in. Confirm your tractor air pressure builds past 120 PSI and stays stable. Walk around the rig to listen for audible air leaks around the trailer supply lines and glad hands. Drain the trailer air tanks to clear built-up moisture or oil. If it is cold, frozen condensate inside the air lines or relay valve may prevent air from reaching the spring chambers to release the brakes.
If air pressure is normal, no leaks are detected, and the trailer spring brakes refuse to release, do not force the truck to drag the tires. Forcing movement damages trailer tires and suspension components. A heavy-duty mobile technician must diagnose the trailer relay valve, test air pressure at the brake chambers, or safely manually cage the spring brakes to free locked wheels.
Driver reported trailer tires dragging with tire streaks visible on the pavement, preventing the truck from moving forward even when put into drive. Yellow check engine light present. Cause not confirmed on the call.
unknown
Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.
When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…
When a Kenworth builds full air pressure but the parking brakes refuse to release, the issue usually stems from a restriction in the spring brake release circuit, a faulty dash brake control valve, or a stuck relay valve. If a valve was recently serviced or r…
When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…
When a Kenworth trailer knob charges properly but the yellow parking brake knob has no air supply, the issue typically points to a failed dash push-pull control valve block, an internal manifold seal failure, or a disconnected supply line behind the dashboard…
123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (502) 219-3300 · Request a quote · Local numbers · Real calls · mtstruckservice.com
Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.