123 TRUCK DIAGNOSTICS(659) 284-1229 · Mobile diagnostics 24/7

Why are my trailer brakes locked up when my truck brakes are working fine?

Eutaw, AL · 2026-11

Call (659) 284-1229Request diagnostics

What was reported

["trailer brakes locked up","truck brakes working fine"]

Our answer

When a trailer's brakes lock up while the tractor brakes remain fully functional, the issue is typically isolated to the trailer air brake system. The most common cause is a severe air leak in the emergency supply line, a failed spring brake chamber, or a malfunctioning trailer relay valve. If the emergency line loses air pressure, the parking spring brakes will automatically engage to lock the wheels. A damaged or frozen gladhand seal, a split rubber hose, or a ruptured brake chamber diaphragm can also cause the system to dump air pressure and lock up. Drivers should first inspect the red gladhand connection to ensure it is properly seated and not leaking air. Check the trailer air lines for visible kinks, cracks, or audible air leaks, and verify that the gladhand shut-off valves on the back of the tractor are open. If the gladhands are secure and air pressure is normal in the tractor, but the trailer brakes will not release, do not force the vehicle to move as it will flat-spot the trailer tires. A mobile technician is required to diagnose relay valve pressure drops or replace damaged brake chambers safely.

What the technician found

Cause not confirmed on the call

How it ended

unknown

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why is my Hino truck stuck in derate with SCR catalyst and ECU fault codes?

Hino · Montgomery, AL · 2026-11

When a Hino truck enters derate or limp mode alongside active SCR system, DEF injection, and transmission control ECU codes, the engine control unit is actively restricting engine performance to prevent emissions violations or hardware damage. Common causes i…

Why did my Mack truck shake violently while driving and then shut down?

2023 Mack · 2026-11

When a heavy-duty truck begins shaking violently while driving and then completely shuts down, it typically points to severe engine misfire, driveline failure, or major automated manual transmission issues. The severe vibration before the engine cut out is of…

What causes a drive shaft to fall out on a 2018 Freightliner Cascadia while driving?

2018 Freightliner Cascadia · Prattville, AL · 2026-11

When a drive shaft drops or falls out on a 2018 Freightliner Cascadia, the most common culprit is failure of a universal joint (U-joint), sheared yoke strap bolts, or extreme play in the slip shaft. Severe differential pinion bearing failure or transmission o…

Why won't my Kenworth parking brake valve push in to release the brakes when I have full air pressure?

Kenworth · Richmond, · 2026-11

When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…

All real calls

123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (659) 284-1229 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.

Call (659) 284-1229Request