123 TRUCK DIAGNOSTICS(855) 450-1212 · Mobile diagnostics 24/7

Why is my semi-truck leaking coolant from a line near the bottom of the radiator?

2026-11

Call (855) 450-1212Request diagnostics

What was reported

["coolant leak","suspected broken coolant line near bottom of radiator"]

Our answer

A coolant leak near the bottom of a semi-truck radiator is commonly caused by a split lower radiator hose, a loose or corroded hose clamp, a damaged oil cooler line, or a crack in the lower radiator tank housing. Road debris, constant engine vibration, and thermal expansion can cause coolant lines or fittings behind the front screen to chafe and break over time.

If you notice coolant pooling under the front of your truck, check your coolant reservoir level and inspect the radiator area with a flashlight. Look behind the front grille or screen for visible liquid spraying, swollen hoses, or loose clamps. Never attempt to remove radiator caps or work under a hot engine if conditions are unsafe or if you cannot maneuver safely under the cab.

Do not drive a heavy-duty truck with an active cooling system leak, as losing coolant can rapidly lead to severe engine overheating and cylinder head failure. A mobile diesel technician can remove protective screens or shrouds, perform a cooling system pressure test, replace damaged hoses or lines on site, and properly bleed the system.

What the technician found

Customer reported a severe coolant leak, suspecting a broken coolant line or hose near the bottom of the radiator behind the screen. Cause not confirmed on the call.

How it ended

unknown

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why won't my Kenworth parking brake valve push in to release the brakes when I have full air pressure?

Kenworth · Richmond, · 2026-11

When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…

Why are my semi truck parking and trailer brake valves refusing to release when I have plenty of air pressure?

2026-11

When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…

Why does my Kenworth yellow parking brake knob have no air supply while the red trailer knob works?

Kenworth · 2026-11

When a Kenworth trailer knob charges properly but the yellow parking brake knob has no air supply, the issue typically points to a failed dash push-pull control valve block, an internal manifold seal failure, or a disconnected supply line behind the dashboard…

Why is my semi truck air leaking or failing at the dash valve when both supply lines have pressure?

2026-11

When both primary and secondary air supply lines deliver full pressure up to the dash control valve but the system fails to hold pressure or operate properly, the internal seals within the dash control valve assembly have likely degraded. The dash brake valve…

What should I do if my air lines wrapped around my tire and snapped the air valve off the back of the cab?

2026-11

When pigtails or air hoses drop and catch on a spinning drive tire or driveshaft, the extreme force will yank the hoses and snap whatever mounting hardware or valve assembly secures them to the back of the tractor cab. Replacing just the red and blue coiled s…

All real calls

123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (855) 450-1212 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.

Call (855) 450-1212Request