123 TRUCK DIAGNOSTICS(405) 254-7006 · Mobile diagnostics 24/7

How do I handle a burst metal fuel line after the fuel pump on a Cat engine?

Peterbilt 389 Caterpillar · Eufaula, OK · 2026-11

Call (405) 254-7006Request diagnostics

What was reported

["fuel line leak","burst metal fuel line after the pump"]

Our answer

A burst metal fuel line on a Caterpillar engine downstream of the fuel pump is usually caused by excessive engine vibration, missing line hold-down clamps, metal fatigue, or over-tightened flare fittings. High fuel pressure behind the pump can quickly turn a micro-crack into a spraying rupture.

If you suspect a high-pressure line leak, safely pull over and shut down the engine immediately to prevent a fire hazard and raw fuel spraying onto hot engine components. With the engine off, perform a visual inspection along the hard fuel lines running from the pump to the manifold or injectors. Look for diesel wetness, cracked line flares, or loose mounting brackets that allowed the line to vibrate against adjacent metal components.

Never attempt to patch a high-pressure metal fuel line with hose, tape, or temporary clamps. Fuel pressure after the pump will easily blow through temporary fixes, creating a serious fire risk and diesel spill. Replacing the damaged metal pipe with a proper OEM hard line or custom high-pressure line requires a technician equipped with correct fittings, flaring tools, and torque specs.

What the technician found

A mechanic checked the truck and confirmed a burst metal fuel line downstream of the fuel pump on a Cat engine.

How it ended

unknown

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why won't my Kenworth parking brake valve push in to release the brakes when I have full air pressure?

Kenworth · Richmond, · 2026-11

When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…

Why won't my 2019 Kenworth release the parking brakes even though the truck is building full air pressure?

2019 Kenworth · Richmond, CA · 2026-11

When a Kenworth builds full air pressure but the parking brakes refuse to release, the issue usually stems from a restriction in the spring brake release circuit, a faulty dash brake control valve, or a stuck relay valve. If a valve was recently serviced or r…

Why are my semi truck parking and trailer brake valves refusing to release when I have plenty of air pressure?

2026-11

When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…

Why does my Kenworth yellow parking brake knob have no air supply while the red trailer knob works?

Kenworth · 2026-11

When a Kenworth trailer knob charges properly but the yellow parking brake knob has no air supply, the issue typically points to a failed dash push-pull control valve block, an internal manifold seal failure, or a disconnected supply line behind the dashboard…

All real calls

123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (405) 254-7006 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.

Call (405) 254-7006Request