123 TRUCK DIAGNOSTICS(855) 450-1212 · Mobile diagnostics 24/7

How do I deal with a leaking engine hose and loose bolts after a recent repair?

Kenworth · 2026-11

Call (855) 450-1212Request diagnostics

What was reported

["leaking engine hose","wet trail under engine","loose bolts after kingpin replacement"]

Our answer

When you notice a wet trail or leaking hose under the hood near the engine, it often points to a blown or deteriorated coolant jumper hose, bypass line, or high-temp pressure hose. Heat cycling and constant vibration can degrade small extension hoses, causing them to crack or blow off fittings. At the same time, finding loose hardware after recent front-end work, such as kingpin replacements, is a serious safety hazard that can cause steering binding, misalignment, or severe component damage.

First, check your coolant level and avoid running the engine if fluid loss is significant to prevent overheating. Inspect the leaking hose for its exact diameter, length, and fitting type, or obtain the OEM part number using your truck VIN through a dealer parts counter. For loose steering or suspension hardware, check if bolts are missing or stripped, but do not operate the vehicle until all fasteners are torqued to manufacturer specifications.

If you cannot source the exact OEM hose or safely torque critical steering bolts on the road, contact a mobile diesel mechanic. A technician can supply the correct high-temperature hose, top off fluids, and properly torque all loose hardware on site to get you rolling safely.

What the technician found

Found a leaking 5 to 6-inch engine pressure hose and two loose bolts left untightened from a previous kingpin replacement.

How it ended

parts needed

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why won't my Kenworth parking brake valve push in to release the brakes when I have full air pressure?

Kenworth · Richmond, · 2026-11

When a yellow parking brake valve will not push in or release the brakes despite having full system air pressure, the issue often stems from a faulty dash control valve, a bad inversion valve, or a stuck spring brake relay valve. Since the truck recently came…

Why are my semi truck parking and trailer brake valves refusing to release when I have plenty of air pressure?

2026-11

When your semi-truck parking and trailer brake control valves won't release despite showing full air pressure on your dash gauges, the issue is often related to a faulty valve assembly, line restriction, or mechanical binding. The primary culprit is usually a…

Why does my Kenworth yellow parking brake knob have no air supply while the red trailer knob works?

Kenworth · 2026-11

When a Kenworth trailer knob charges properly but the yellow parking brake knob has no air supply, the issue typically points to a failed dash push-pull control valve block, an internal manifold seal failure, or a disconnected supply line behind the dashboard…

Why is my semi truck air leaking or failing at the dash valve when both supply lines have pressure?

2026-11

When both primary and secondary air supply lines deliver full pressure up to the dash control valve but the system fails to hold pressure or operate properly, the internal seals within the dash control valve assembly have likely degraded. The dash brake valve…

What should I do if my air lines wrapped around my tire and snapped the air valve off the back of the cab?

2026-11

When pigtails or air hoses drop and catch on a spinning drive tire or driveshaft, the extreme force will yank the hoses and snap whatever mounting hardware or valve assembly secures them to the back of the tractor cab. Replacing just the red and blue coiled s…

All real calls

123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (855) 450-1212 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.

Call (855) 450-1212Request