123 TRUCK DIAGNOSTICS(916) 756-2327 · Mobile diagnostics 24/7

Why is my Cummins engine losing fuel prime and failing to build secondary air pressure?

Cummins · Etiwanda, CA · 2026-11

Call (916) 756-2327Request diagnostics

What was reported

["engine won't stay running","losing fuel prime","secondary air pressure stuck at 12 psi"]

Our answer

When a heavy-duty truck equipped with a Cummins engine dies shortly after starting and fails to build secondary air pressure, the two symptoms are usually linked by engine operation. If the engine continually stalls due to fuel starvation, the engine-driven air compressor cannot run long enough to charge the air tanks. First, verify whether recent fuel system maintenance was performed. A misaligned O-ring, loose fuel filter, loose suction line, or cracked filter housing can allow air to enter the fuel system, causing the engine to lose prime and shut down. Inspect for diesel leaks around the filter head and ensure the manual priming pump operates correctly. Also inspect visible air lines and airbags for audible leaks in case a separate air system fault exists. If the engine will not stay running long enough to charge the air tanks after manual priming, a mobile diesel mechanic should be called to perform a fuel system vacuum pressure test, prime the high-pressure fuel rail, and check for system air leaks.

What the technician found

Engine stalls from losing fuel prime following a recent fuel service, preventing the air compressor from running long enough to build secondary air pressure. Cause not confirmed on the call.

How it ended

unknown

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why won't my 2019 Kenworth release the parking brakes even though the truck is building full air pressure?

2019 Kenworth · Richmond, CA · 2026-11

When a Kenworth builds full air pressure but the parking brakes refuse to release, the issue usually stems from a restriction in the spring brake release circuit, a faulty dash brake control valve, or a stuck relay valve. If a valve was recently serviced or r…

Why won't my 1999 Volvo semi truck start back up after I turned off the engine?

1999 Volvo · San Carlos, CA · 2026-11

When a 1999 Volvo semi truck refuses to start after being turned off, the issue usually stems from electrical power loss, starter circuit failure, or fuel delivery issues. On older Volvos, a common culprit is weak or discharged batteries that lack the crankin…

Why is my truck leaking oil and displaying a low oil light right after an oil service?

Standish, CA · 2026-11

When a heavy-duty diesel truck develops a sudden oil leak right after an oil service, the most common culprit is a damaged, misseated, or double-gasketed oil filter seal. Another frequent issue is an improperly torqued oil filter housing cover, a cracked filt…

Why won't my Volvo semi truck crank or start at a truck stop?

Volvo · Lodi, CA · 2026-11

When a Volvo semi truck fails to start, the most common issues trace back to the starter motor, starter solenoid, battery voltage, or high-resistance electrical connections. A driver can start by checking the batteries to ensure they are providing sufficient …

Why did my 2020 Freightliner Cascadia DD15 shut down for low oil pressure when the oil level is full?

2020 Freightliner Cascadia DD15 · Glendora, CA · 2026-11

When a 2020 Freightliner Cascadia with a Detroit DD15 engine experiences an automatic engine shutdown for low oil pressure while the dipstick shows oil level is full, the issue is frequently electrical or sensor-related, though mechanical failure must be rule…

All real calls

123 Truck Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (916) 756-2327 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Engine and truck brand names are used only to describe what we diagnose. We are an independent service, not affiliated with any manufacturer.

Call (916) 756-2327Request